We provide Medical gas system solutions for hospitals and healthcare facilities. Their offerings include medical air, oxygen, nitrous oxide, and vacuum systems. They also offer bulk liquid oxygen tanks, vaporizers, and automatic manifold systems. All their products are compliant with HTM 02-01 specifications and are designed for safety and reliability.
In addition to medical gas systems, this company also offers medical/surgical air plants, medical vacuum plants, and zone valve systems. Their air plants incorporate variable speed drive compressors for energy savings. They also manufacture simplex, duplex, triplex, and quadruple medical vacuum plants with “fail-safe” control systems. Zone valve systems provide monitoring, isolation, and delivery of medical gases in critical care environments.
Oxygen Generator
Centralised source of Oxygen up to 96% +/- 3% purity available in a variety of configurations
Automatic Manifolds
A standard system would feature a central control panel with a header assembly.
Master Alarm Panel
Master alarm panel provides continuous monitoring of medical gas installations
Degreased Medical Copper Tube And Accessories
Degreased copper tube is manufactured under BS EN
Oxygen Generator
- Centralised source of Oxygen up to 96% +/- 3% purity available in a variety of configurations
- The stations are readily equipped with O2 analysers.
- Complete with an Alarm.
- A Digital Touchscreen control with factory preset configuration.
- Easy-to-read images.
- A bespoke design service is available.
- Manufactured in our UK factory, fully tested, and ready to install.
- ISO 10083 and conforms to HTM and EN Standards.
Bulk Liquid Oxygen Tanks & vaporizers
- Manufactured and tested according to the European Pressure Equipment Directive or to the regulations of other countries.
- Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres.
- Low evaporation rate.
- Ergonomic layout of instruments and controls for ease of use.
- Manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
- High quality is ensured by measures, including a quality management system complying to ISO 9001.
- VIE Control Panels available 500I/min-6000l/min.
Automatic Manifolds
- A standard system would feature a central control panel with a header assembly.
- Digital display of bottle pressure for duty and standby banks.
- Electronic control with alarm and BMS outputs for remote status indication.
- The unit is designed for wall mounting as standard, however, options available include floor-mounted assemblies and formats to suit customer requirements.
- Also available is a high flow capable of providing a distribution flow rate up to 2500l/min.
- Options – Touchscreen, BMS Modbus Digital Outputs, SMS Texting Alarm
- Configurations – Third Source, Back to Back, Double Stack Heading
Reserve Manifolds
- Fully HTM 02-01 compliant
- Uses 2 stage regulator for good flow characteristics
- Supplied with pre-set regulators and pressure sensors
- Uses highly visible readouts for cylinder contents and pipeline pressure
- Provides safety relief and isolation valves
- Can be supplied in wall or floor mounted variants
- Electrical connections pre-wired to a termination box
Medical/Surgical Air Plant
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396.
- solid British design.
- Control and highly visible indication panel.
- All interconnecting pipework is included.
- Outlet pipework for connecting to the pipeline.
- Anti-vibration mounts on all compressors.
- Isolator to each pump unit as standard.
- Alarm and BMS outputs for remote status indication.
- Digital display touchscreen with a user interface.
- 400Kpa, 700Kpa and 1000Kpa output versions available.
- All settings are factory set and verified with certificates of inspection.
- Each plant has a full warranty of 12 months from its commission date.
Medical Vacuum Plant
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396
- Solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
- Options – Touchscreen, BMS Modbus, Digital Outputs,SMS Texting Alarms, Service Reminders
AGSS Duplex Plant
- Solid British design
- Control and highly visible indication panel
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low-pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Area Valve Zone Module
- Brand-new 2023 design
- Modules are available in the following Flush or Surface fitting types.
- HTM 02-01, BS EN 18082, and C11 fully compliant ensuring individual gas separation in case of emergency.
- Gas types available O2, N2O,O2/N2O, MA4, SA7, VAC, CO2, N2, Helium Mix, Lab Gas other variables available on request.
- Factory tested and certified Pre-Piped EN 13348 Copper Tube to top ceiling level to aid in installation.
- Extremely hard-wearing, impact-proof Polymer Laminate material, available in a selection of colours.
- Delivered assembled to site for easy one-man installation.
Compact AVSU Module
- The AVSU can be installed as a flush or surface mounted.
- Gas Identification is located on the body of the AVSU behind the window and is immovable.
- A large viewing window to the door gives an immediate indication of Gas Identification located on the body of AVSU, valve position, and flow direction.
- In an emergency, this can be gained by pulling the window thus allowing access to the valve. The anti-tamper device can be fitted to the window and connected to our Digital Alarm and BMS to incorporate monitoring of all AVSU’s.
- Non-interchangeable NIST connectors are fitted upstream and downstream of the valve. Including 100% sealing serviceable non-return valves to allow the pipeline to be pressure tested and provide an easily accessible point for gas sampling.
Area Valve Service Unit
The Single Area Valve Service Unit (AVSU’s) are manufactured under BS EN 13485 Medical Devices: Quality Management Systems and Medical Devices Directive 93/42/EEC class IIb. They provide a local gas isolation facility for use during normal installation and maintenance or in the event of an emergency. They are built in accordance with the HTM02-01, C11 and BS EN 18082 standards and are suitable for Oxygen, Nitrous Oxide, Oxy-Nitrous Oxide, MA4, MA7, CO2 and Vacuum (other gasses available upon request).
Area Alarm Panel
Pressure is monitored via a transducer in the pipeline downstream from the last AVSU, this pressure is monitored for both high and low pressure (low only for vacuum). A fault on the cabling between the pressure transducer and alarm panel would result in a system fault alarm and as a result, the integrity of the cabling is incomparable.
Digital Area Alarm is available in two different and versatile installation models. The alarm unit provides an indication of 3 conditions of gas, normal, Low pressure, and High pressure for up to 6 Gas services.
Each service has a green normal, red high-pressure, and red low-pressure indication, the vacuum service has a green normal and red low-pressure indication and is programmed via an antimicrobial touchscreen display.
Master Alarm Panel
Master alarm panel provides continuous monitoring of medical gas installations across hospitals and other healthcare providers. It monitors up to 4 conditions for each gas and up to 6 gases per panel, giving clients comprehensive information about the state of their supply at any given time.
The system is easy to install and also to operate, with only 1 pair of cables used as interconnecting wiring. The alarm system meets the current HTM02-01 and HTM2022 specifications.
Each unit also benefits from useful features such as a volume control, mute button and engineer’s reset button. They can easily be tested to ensure they are still working and a light will be illuminated when the mute button is pressed. Access to the panels is gained via a hinged door and a tamperproof screw so clients can be certain their system is safe and secure at all times, other than when they specifically choose to access it. Different panels are available for either flush or surface mounting applications, to take into consideration the different requirements of different healthcare providers.
Pressure Reducing Station
Simplex and Duplex
All systems are manufactured to HTM 02-01 specifications are factory tested prior to dispatch and come with a comprehensive warranty.
Specification shown is a Duplex Regulator Station.
- Fully compliant to HTM 02-01 specification
- Flat faced ‘o’ ring pipeline unions
- Includes gauge and pressure relief valve
- Pre set and pressure tested in the factory prior to dispatch
Medical Gas Terminal Units
Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise a first fix, second fix, and second fix valve assembly and connect medical appliances to the gas supply system. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead, and pendant, and are supplied with a 3-year warranty. Test plugs are included with flush, surface, and bedhead types for first-fix pressure testing on site.
Lockable Line Valves
lockable line valve is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are designed to have a tight shut-off and blow-out-proof stem for protection against pressure surges.
Non-Return Valves
All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
- Fully HTM 02-01 compliant
- Can be supplied for use with pipework of 15mm to 104mm
- Fitted with flat faced ‘o’ ring unions
- Every unit is tested for pressure and tightness before dispatch
Degreased Medical Copper Tube
Degreased copper tube is manufactured under BS EN 13485 Medical Devices: Quality Management Systems.
- Each pipe is cleaned to have a maximum carbon level of 0.20mg/dm².
- Each pipe is individually end-capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no.
- 25-year guarantee
Degreased Medical Gas Copper Fittings
Compliant to HTM 02-01, BS EN 13384, BS EN 1057, and BS 287 Part 1 Table X as quoted in HTM 02-01 & C11
- Each fitting is individually bagged in clear protective polythene bags and sealed to maintain cleanliness.
- All fittings carry a label identifying the degreased specification and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
Brass Munsen Ring
end-feed copper fittings are manufactured in the UK under BS EN 13348. Munsen Rings are manufactured from brass with a single M10 tapping complete with brass screws. M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws.
Medical Gas Pipeline Identification Tape
Pipeline ID tape is suitable for identifying medical gas pipelines compliant with BS EN 7396, HTM 02-01 NHS Health Technical Memorandum, C11, and BS 1710. Colour banding should be applied near valves, junctions, walls, etc. A label every 3m should identify each gas and arrow tape showing the flow direction of the gas.
NIST
O2 Ceiling NIST Copper Tube – 15mm Dia – 150mm Length
- Gas Specific Female NIST
- Gas Specific engraving on Female NIST
- Supplied with a length of Copper pipe
- Machined to BS EN ISO 5359:2008
Antistatic Hose
- Special hoses for medical gases
- Made of thermoplastic and rubber material
- Color coding according to EN 739 standard
- Suitable up to 20 bar pressure
- Inner dia: 6,7 mm Outer dia: 12 mm
Oxygen Generator
- Centralised source of Oxygen up to 96% +/- 3% purity available in a variety of configurations
- The stations are readily equipped with O2 analysers.
- Complete with an Alarm.
- A Digital Touchscreen control with factory preset configuration.
- Easy-to-read images.
- A bespoke design service is available.
- Manufactured in our UK factory, fully tested, and ready to install.
- ISO 10083 and conforms to HTM and EN Standards.
Bulk Liquid Oxygen Tanks & vaporizers
- Manufactured and tested according to the European Pressure Equipment Directive or to the regulations of other countries.
- Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres.
- Low evaporation rate.
- Ergonomic layout of instruments and controls for ease of use.
- Manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
- High quality is ensured by measures, including a quality management system complying to ISO 9001.
- VIE Control Panels available 500I/min-6000l/min.
Automatic Manifolds
- A standard system would feature a central control panel with a header assembly.
- Digital display of bottle pressure for duty and standby banks.
- Electronic control with alarm and BMS outputs for remote status indication.
- The unit is designed for wall mounting as standard, however, options available include floor-mounted assemblies and formats to suit customer requirements.
- Also available is a high flow capable of providing a distribution flow rate up to 2500l/min.
- Options – Touchscreen, BMS Modbus Digital Outputs, SMS Texting Alarm
- Configurations – Third Source, Back to Back, Double Stack Heading
Reserve Manifolds
- Fully HTM 02-01 compliant
- Uses 2 stage regulator for good flow characteristics
- Supplied with pre-set regulators and pressure sensors
- Uses highly visible readouts for cylinder contents and pipeline pressure
- Provides safety relief and isolation valves
- Can be supplied in wall or floor mounted variants
- Electrical connections pre-wired to a termination box
Medical/Surgical Air Plant
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396.
- solid British design.
- Control and highly visible indication panel.
- All interconnecting pipework is included.
- Outlet pipework for connecting to the pipeline.
- Anti-vibration mounts on all compressors.
- Isolator to each pump unit as standard.
- Alarm and BMS outputs for remote status indication.
- Digital display touchscreen with a user interface.
- 400Kpa, 700Kpa and 1000Kpa output versions available.
- All settings are factory set and verified with certificates of inspection.
- Each plant has a full warranty of 12 months from its commission date.
Medical Vacuum Plant
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396
- Solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
- Options – Touchscreen, BMS Modbus, Digital Outputs,SMS Texting Alarms, Service Reminders
AGSS Duplex Plant
- Solid British design
- Control and highly visible indication panel
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low-pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Area Valve Zone Module
- Brand-new 2023 design
- Modules are available in the following Flush or Surface fitting types.
- HTM 02-01, BS EN 18082, and C11 fully compliant ensuring individual gas separation in case of emergency.
- Gas types available O2, N2O,O2/N2O, MA4, SA7, VAC, CO2, N2, Helium Mix, Lab Gas other variables available on request.
- Factory tested and certified Pre-Piped EN 13348 Copper Tube to top ceiling level to aid in installation.
- Extremely hard-wearing, impact-proof Polymer Laminate material, available in a selection of colours.
- Delivered assembled to site for easy one-man installation.
Compact AVSU Module
- The AVSU can be installed as a flush or surface mounted.
- Gas Identification is located on the body of the AVSU behind the window and is immovable.
- A large viewing window to the door gives an immediate indication of Gas Identification located on the body of AVSU, valve position, and flow direction.
- In an emergency, this can be gained by pulling the window thus allowing access to the valve. The anti-tamper device can be fitted to the window and connected to our Digital Alarm and BMS to incorporate monitoring of all AVSU’s.
- Non-interchangeable NIST connectors are fitted upstream and downstream of the valve. Including 100% sealing serviceable non-return valves to allow the pipeline to be pressure tested and provide an easily accessible point for gas sampling.
Area Valve Service Unit
The Single Area Valve Service Unit (AVSU’s) are manufactured under BS EN 13485 Medical Devices: Quality Management Systems and Medical Devices Directive 93/42/EEC class IIb. They provide a local gas isolation facility for use during normal installation and maintenance or in the event of an emergency. They are built in accordance with the HTM02-01, C11 and BS EN 18082 standards and are suitable for Oxygen, Nitrous Oxide, Oxy-Nitrous Oxide, MA4, MA7, CO2 and Vacuum (other gasses available upon request).
Area Alarm Panel
Pressure is monitored via a transducer in the pipeline downstream from the last AVSU, this pressure is monitored for both high and low pressure (low only for vacuum). A fault on the cabling between the pressure transducer and alarm panel would result in a system fault alarm and as a result, the integrity of the cabling is incomparable.
Digital Area Alarm is available in two different and versatile installation models. The alarm unit provides an indication of 3 conditions of gas, normal, Low pressure, and High pressure for up to 6 Gas services.
Each service has a green normal, red high-pressure, and red low-pressure indication, the vacuum service has a green normal and red low-pressure indication and is programmed via an antimicrobial touchscreen display.
Master Alarm Panel
Master alarm panel provides continuous monitoring of medical gas installations across hospitals and other healthcare providers. It monitors up to 4 conditions for each gas and up to 6 gases per panel, giving clients comprehensive information about the state of their supply at any given time.
The system is easy to install and also to operate, with only 1 pair of cables used as interconnecting wiring. The alarm system meets the current HTM02-01 and HTM2022 specifications.
Each unit also benefits from useful features such as a volume control, mute button and engineer’s reset button. They can easily be tested to ensure they are still working and a light will be illuminated when the mute button is pressed. Access to the panels is gained via a hinged door and a tamperproof screw so clients can be certain their system is safe and secure at all times, other than when they specifically choose to access it. Different panels are available for either flush or surface mounting applications, to take into consideration the different requirements of different healthcare providers.
Pressure Reducing Station
Simplex and Duplex
All systems are manufactured to HTM 02-01 specifications are factory tested prior to dispatch and come with a comprehensive warranty.
Specification shown is a Duplex Regulator Station.
- Fully compliant to HTM 02-01 specification
- Flat faced ‘o’ ring pipeline unions
- Includes gauge and pressure relief valve
- Pre set and pressure tested in the factory prior to dispatch
Medical Gas Terminal Units
Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise a first fix, second fix, and second fix valve assembly and connect medical appliances to the gas supply system. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead, and pendant, and are supplied with a 3-year warranty. Test plugs are included with flush, surface, and bedhead types for first-fix pressure testing on site.
Lockable Line Valves
lockable line valve is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are designed to have a tight shut-off and blow-out-proof stem for protection against pressure surges.
Non-Return Valves
All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
- Fully HTM 02-01 compliant
- Can be supplied for use with pipework of 15mm to 104mm
- Fitted with flat faced ‘o’ ring unions
- Every unit is tested for pressure and tightness before dispatch
Degreased Medical Copper Tube
Degreased copper tube is manufactured under BS EN 13485 Medical Devices: Quality Management Systems.
- Each pipe is cleaned to have a maximum carbon level of 0.20mg/dm².
- Each pipe is individually end-capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no.
- 25-year guarantee
Degreased Medical Gas Copper Fittings
Compliant to HTM 02-01, BS EN 13384, BS EN 1057, and BS 287 Part 1 Table X as quoted in HTM 02-01 & C11
- Each fitting is individually bagged in clear protective polythene bags and sealed to maintain cleanliness.
- All fittings carry a label identifying the degreased specification and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
Brass Munsen Ring
end-feed copper fittings are manufactured in the UK under BS EN 13348. Munsen Rings are manufactured from brass with a single M10 tapping complete with brass screws. M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws.
Medical Gas Pipeline Identification Tape
Pipeline ID tape is suitable for identifying medical gas pipelines compliant with BS EN 7396, HTM 02-01 NHS Health Technical Memorandum, C11, and BS 1710. Colour banding should be applied near valves, junctions, walls, etc. A label every 3m should identify each gas and arrow tape showing the flow direction of the gas.
NIST
O2 Ceiling NIST Copper Tube – 15mm Dia – 150mm Length
- Gas Specific Female NIST
- Gas Specific engraving on Female NIST
- Supplied with a length of Copper pipe
- Machined to BS EN ISO 5359:2008
Antistatic Hose
- Special hoses for medical gases
- Made of thermoplastic and rubber material
- Color coding according to EN 739 standard
- Suitable up to 20 bar pressure
- Inner dia: 6,7 mm Outer dia: 12 mm
Oxygen Generator
- Centralised source of Oxygen up to 96% +/- 3% purity available in a variety of configurations
- The stations are readily equipped with O2 analysers.
- Complete with an Alarm.
- A Digital Touchscreen control with factory preset configuration.
- Easy-to-read images.
- A bespoke design service is available.
- Manufactured in our UK factory, fully tested, and ready to install.
- ISO 10083 and conforms to HTM and EN Standards.
Bulk Liquid Oxygen Tanks & vaporizers
- Manufactured and tested according to the European Pressure Equipment Directive or to the regulations of other countries.
- Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres.
- Low evaporation rate.
- Ergonomic layout of instruments and controls for ease of use.
- Manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
- High quality is ensured by measures, including a quality management system complying to ISO 9001.
- VIE Control Panels available 500I/min-6000l/min.
Automatic Manifolds
- A standard system would feature a central control panel with a header assembly.
- Digital display of bottle pressure for duty and standby banks.
- Electronic control with alarm and BMS outputs for remote status indication.
- The unit is designed for wall mounting as standard, however, options available include floor-mounted assemblies and formats to suit customer requirements.
- Also available is a high flow capable of providing a distribution flow rate up to 2500l/min.
- Options – Touchscreen, BMS Modbus Digital Outputs, SMS Texting Alarm
- Configurations – Third Source, Back to Back, Double Stack Heading
Reserve Manifolds
- Fully HTM 02-01 compliant
- Uses 2 stage regulator for good flow characteristics
- Supplied with pre-set regulators and pressure sensors
- Uses highly visible readouts for cylinder contents and pipeline pressure
- Provides safety relief and isolation valves
- Can be supplied in wall or floor mounted variants
- Electrical connections pre-wired to a termination box
Medical/Surgical Air Plant
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396.
- solid British design.
- Control and highly visible indication panel.
- All interconnecting pipework is included.
- Outlet pipework for connecting to the pipeline.
- Anti-vibration mounts on all compressors.
- Isolator to each pump unit as standard.
- Alarm and BMS outputs for remote status indication.
- Digital display touchscreen with a user interface.
- 400Kpa, 700Kpa and 1000Kpa output versions available.
- All settings are factory set and verified with certificates of inspection.
- Each plant has a full warranty of 12 months from its commission date.
Medical Vacuum Plant
- Fully complies with HTM 02-01, HTM 2022, C11, BS EN 7396
- Solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
- Options – Touchscreen, BMS Modbus, Digital Outputs,SMS Texting Alarms, Service Reminders
AGSS Duplex Plant
- Solid British design
- Control and highly visible indication panel
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low-pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Area Valve Zone Module
- Brand-new 2023 design
- Modules are available in the following Flush or Surface fitting types.
- HTM 02-01, BS EN 18082, and C11 fully compliant ensuring individual gas separation in case of emergency.
- Gas types available O2, N2O,O2/N2O, MA4, SA7, VAC, CO2, N2, Helium Mix, Lab Gas other variables available on request.
- Factory tested and certified Pre-Piped EN 13348 Copper Tube to top ceiling level to aid in installation.
- Extremely hard-wearing, impact-proof Polymer Laminate material, available in a selection of colours.
- Delivered assembled to site for easy one-man installation.
Compact AVSU Module
- The AVSU can be installed as a flush or surface mounted.
- Gas Identification is located on the body of the AVSU behind the window and is immovable.
- A large viewing window to the door gives an immediate indication of Gas Identification located on the body of AVSU, valve position, and flow direction.
- In an emergency, this can be gained by pulling the window thus allowing access to the valve. The anti-tamper device can be fitted to the window and connected to our Digital Alarm and BMS to incorporate monitoring of all AVSU’s.
- Non-interchangeable NIST connectors are fitted upstream and downstream of the valve. Including 100% sealing serviceable non-return valves to allow the pipeline to be pressure tested and provide an easily accessible point for gas sampling.
Area Valve Service Unit
The Single Area Valve Service Unit (AVSU’s) are manufactured under BS EN 13485 Medical Devices: Quality Management Systems and Medical Devices Directive 93/42/EEC class IIb. They provide a local gas isolation facility for use during normal installation and maintenance or in the event of an emergency. They are built in accordance with the HTM02-01, C11 and BS EN 18082 standards and are suitable for Oxygen, Nitrous Oxide, Oxy-Nitrous Oxide, MA4, MA7, CO2 and Vacuum (other gasses available upon request).
Area Alarm Panel
Pressure is monitored via a transducer in the pipeline downstream from the last AVSU, this pressure is monitored for both high and low pressure (low only for vacuum). A fault on the cabling between the pressure transducer and alarm panel would result in a system fault alarm and as a result, the integrity of the cabling is incomparable.
Digital Area Alarm is available in two different and versatile installation models. The alarm unit provides an indication of 3 conditions of gas, normal, Low pressure, and High pressure for up to 6 Gas services.
Each service has a green normal, red high-pressure, and red low-pressure indication, the vacuum service has a green normal and red low-pressure indication and is programmed via an antimicrobial touchscreen display.
Master Alarm Panel
Master alarm panel provides continuous monitoring of medical gas installations across hospitals and other healthcare providers. It monitors up to 4 conditions for each gas and up to 6 gases per panel, giving clients comprehensive information about the state of their supply at any given time.
The system is easy to install and also to operate, with only 1 pair of cables used as interconnecting wiring. The alarm system meets the current HTM02-01 and HTM2022 specifications.
Each unit also benefits from useful features such as a volume control, mute button and engineer’s reset button. They can easily be tested to ensure they are still working and a light will be illuminated when the mute button is pressed. Access to the panels is gained via a hinged door and a tamperproof screw so clients can be certain their system is safe and secure at all times, other than when they specifically choose to access it. Different panels are available for either flush or surface mounting applications, to take into consideration the different requirements of different healthcare providers.
Pressure Reducing Station
Simplex and Duplex
All systems are manufactured to HTM 02-01 specifications are factory tested prior to dispatch and come with a comprehensive warranty.
Specification shown is a Duplex Regulator Station.
- Fully compliant to HTM 02-01 specification
- Flat faced ‘o’ ring pipeline unions
- Includes gauge and pressure relief valve
- Pre set and pressure tested in the factory prior to dispatch
Medical Gas Terminal Units
Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise a first fix, second fix, and second fix valve assembly and connect medical appliances to the gas supply system. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead, and pendant, and are supplied with a 3-year warranty. Test plugs are included with flush, surface, and bedhead types for first-fix pressure testing on site.
Lockable Line Valves
lockable line valve is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are designed to have a tight shut-off and blow-out-proof stem for protection against pressure surges.
Non-Return Valves
All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
- Fully HTM 02-01 compliant
- Can be supplied for use with pipework of 15mm to 104mm
- Fitted with flat faced ‘o’ ring unions
- Every unit is tested for pressure and tightness before dispatch
Degreased Medical Copper Tube
Degreased copper tube is manufactured under BS EN 13485 Medical Devices: Quality Management Systems.
- Each pipe is cleaned to have a maximum carbon level of 0.20mg/dm².
- Each pipe is individually end-capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no.
- 25-year guarantee
Degreased Medical Gas Copper Fittings
Compliant to HTM 02-01, BS EN 13384, BS EN 1057, and BS 287 Part 1 Table X as quoted in HTM 02-01 & C11
- Each fitting is individually bagged in clear protective polythene bags and sealed to maintain cleanliness.
- All fittings carry a label identifying the degreased specification and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
Brass Munsen Ring
end-feed copper fittings are manufactured in the UK under BS EN 13348. Munsen Rings are manufactured from brass with a single M10 tapping complete with brass screws. M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws.
Medical Gas Pipeline Identification Tape
Pipeline ID tape is suitable for identifying medical gas pipelines compliant with BS EN 7396, HTM 02-01 NHS Health Technical Memorandum, C11, and BS 1710. Colour banding should be applied near valves, junctions, walls, etc. A label every 3m should identify each gas and arrow tape showing the flow direction of the gas.
NIST
O2 Ceiling NIST Copper Tube – 15mm Dia – 150mm Length
- Gas Specific Female NIST
- Gas Specific engraving on Female NIST
- Supplied with a length of Copper pipe
- Machined to BS EN ISO 5359:2008
Antistatic Hose
- Special hoses for medical gases
- Made of thermoplastic and rubber material
- Color coding according to EN 739 standard
- Suitable up to 20 bar pressure
- Inner dia: 6,7 mm Outer dia: 12 mm