Modern medicine seeks to reduce the burden on the patient by reducing invasive treatment to a minimum. This has transferred this approach to the patient room: the slimmest care unit possible with a clear form language and a front made completely of translucent plastic. It acts as a surface over which the sun rises as soon as the light is switched on.
The Bed Head Unit responds to the invasion of the patient room by medical equipment with the creation of a pleasant visual calming effect – with maximum functionality for personnel and patient alike. All the necessary electric sockets and communications connections, medical gas outlets and general and reading lights are integrated in a highly-flexible modular system.
It is fitted with indirect general lighting, adjustable reading lights, a night light and optional RBG LED surround lighting.
The special acceptance system on the underside enables supplementing the with accessories enabling a response to almost every requirement.
In intensive medicine, the life of patients can depend on a very few machines. State-of-the-art medical devices, connected to an absolutely reliable, functional and easy-to-operate supply system represent the basic requirements for maintaining life-sustaining measures. The Bed Head Unit was developed to enable the easy handling of all personnel-serviced devices requiring an energy supply. This facilitates all the treatment, care and monitoring which the patient requires. All the necessary electric sockets and communications connections, medical gas outlets and general and reading lights are integrated in a highly-flexible modular system. The wall system consists of right-angled extruded aluminium supply profiles in two depths, matching equipment rail profiles and lights with translucent extruded acrylic-satin light covers.
This Bed Head Unit is available in various designs and can be fitted with medical connection devices, consoles and accessories. The 1-bar or 2-bar cart on the positive-fitting adjustable equipment rail profile (25 x 10 mm) provide the highest-possible level of flexibility. The use of such a moveable cart is possible as the shallow nature of the central channel leaves plenty of space for the medical gas connection plugs or accessories mounted to the central equipment rails.
The character of a room has considerable influence on patient well-being and their recovery. This Unit creates spaces of calm. The product merges with the architecture to produce a single unit – an integrative room concept which becalms the clinical atmosphere – whilst providing full functionality and ergonomics for personnel and patient alike.
It is more than a medical supply unit. It is a modular construction system, solving all supply challenges and releasing space for creativity in the room design. It can be used in a number of environments, ranging from normal care duties to the care home. The Bed head Unit provides a whole range of new design features with which to realize a homely environment. Its combinable basic form enables its perfect integration in the room design.
It is integrated flush in a wall panel. It is adaptable to the room design both in terms of material and surface and at the same time, functions as a wall protector. The connections are directly accessible from the front. The positive-fitting integrate able equipment rail profile (25 x 10 mm) for attaching medical devices represents the perfect supplement.
The system represents the perfect solution for the deployment of multimedia terminals at the patient bed. The feed-in and wall-fastening of TV extension arms can be integrated smoothly.
Calm is one of the most important factors in a patient’s recovery. vertical medical supply unit provides for the necessary visual calm.
Its convex front with aluminium lateral carrying profiles floats in front of the wall, covering power sockets and communications technology from direct sight. This produces a generous, restrained overall appearance, providing the patient room with a cosy atmosphere.
The design approach is liberation from the past. Experience tells us to retain – what has proven itself.
The bed head unit releases itself from classical forms whilst fulfilling all demands of functionality and manageability. This compact unit combines media supply with a wooden panel and an asymmetrically placed light. The sockets for high and low voltage current and the medical gases are directly accessible from the front. Wall brackets for multimedia arms can be integrated behind the wooden panel.
The asymmetrical arrangement of the care unit and lighting elements enables functional optimization. Sockets and medical gases are located well within reach next to the patient bed; the light illuminates the room and the reading space above the bed.
compact and comfortable
Adapted to medical use: this can also be fitted with a clamping groove in which accessories can be integrated and can be supplemented by an 25 x 10 mm integrative standard equipment rail.
The harmonious combination of extruded, naturally coloured anodized aluminium profiles with coloured fronts make for a high-class finish. A range of front decors are available, enabling the adaptation of the supply unit to the interior design or the setting of coloured accents.
As horizontal medical supply unit the can be harmonically integrated into each patient room design – into straight-lined new buildings as well as into stylish old buildings. The supply unit is available in two modern and one classic versions: it appears especially fine due to the surrounding thin edge, the front of model S 700 b is horizontally stretched by a slim aluminium stripe and this fits into classic interiors by stylish decorative profiles.
The housing of the medical supply unit is made of extruded, naturally anodized aluminium. HPL-décors can be flush-fitted into the front, thus carrying on the design of the patient room – or setting accents deliberately. Furthermore, there is the possibility to have the front in glass look in several plain colours.
Fitted end covers made of anodized aluminium complete the high quality impression. The top and bottom sides are inclined by 6°. The upper side consists of highly translucent PMMA (acrylic) and is extremely resistant to common cleaning and disinfection solutions.
Beam is a ceiling mounted unit fitted with lighting, provision for medical gases, electrical switches and sockets.
It is a ceiling mounted unit fitted with lighting, provision for medical gases, electrical switches and sockets. The system has been designed for intensive care units, preparation and recovery rooms which require several sockets and switches to supply medical equipment such as monitors, dialysis machines, respirators and other machines required to keep the patient alive. Both sides of the unit can be equipped with the medical equipment.
Designed to guarantee complete ease of movement, the new track rail allows to slide and safely fix all needed equipment for whichever level of intensive treatment.
This optional feature ensures a well-lighted atmosphere while the main ambient lighting is off. Perfectly integrated inside the ceiling pillars this system can be both controlled from the unit itself or any additional handset if needed.
Ceiling hanging unit greatest example of how technical know-how and responsible attitude to strive for the best results coalesce harmoniously.
This is the greatest example of how technical know-how and responsible attitude to strive for the best results coalesce harmoniously. It can be also offered in free-standing configuration, fixed on the ceiling through a solid pillar. In this way this can be mounted anywhere in the room with a wide range of accessories and rotating equipment carries making this bed head unit the ideal solution for special intensive care units.
The head can freely rotate 345°. In this way the medical staff can always have easy access to all equipment. This reduces to the minimum the workload and enhances significantly the workflow.
In only one solution Bridge unit houses all needed services (lights, sockets and switches, nurse call system, gas outlets) which can be arranged in each side both internally and externally.
The structural profiles and pillars, as per our overall standard, are completely extruded: The generous thickness guarantees an adequate
payload allowing the possibility to mount all the necessary equipment without risking to overload the whole structure. The whole system
can be equipped with a broad range of accessories that can slide along all 4 sides thanks to our newly engineered rotating corners.
The possibility to combine the whole unit to a ceiling laminar flow system allows a dramatic reduction of the air turbulence that offers a completely germ-free environment.
The corners can be offered evenly:
- Standard non-rotating having accessories sliding only along one side.
- 90° rotating to maximize the usage of accessories that can be moved from one side to the other.
Pendant is a suspended unit thought specifically for special intensive care units and operating theaters. It can be configured either for the surgeon or the anesthesiologist and the service head can be equipped with all the needed electrical and medical components in compliance with any specification given. It has been designed to offer the medical staff maximum flexibility and reliability.
The unit can be also supplied in the most complete configuration which is highly requested for all ICU areas.
The column is customizable with
- Shelves and storage
- Cable management system
- Mounting system
- Single workstation component
Modern medicine seeks to reduce the burden on the patient by reducing invasive treatment to a minimum. This has transferred this approach to the patient room: the slimmest care unit possible with a clear form language and a front made completely of translucent plastic. It acts as a surface over which the sun rises as soon as the light is switched on.
The Bed Head Unit responds to the invasion of the patient room by medical equipment with the creation of a pleasant visual calming effect – with maximum functionality for personnel and patient alike. All the necessary electric sockets and communications connections, medical gas outlets and general and reading lights are integrated in a highly-flexible modular system.
It is fitted with indirect general lighting, adjustable reading lights, a night light and optional RBG LED surround lighting.
The special acceptance system on the underside enables supplementing the with accessories enabling a response to almost every requirement.
In intensive medicine, the life of patients can depend on a very few machines. State-of-the-art medical devices, connected to an absolutely reliable, functional and easy-to-operate supply system represent the basic requirements for maintaining life-sustaining measures. The Bed Head Unit was developed to enable the easy handling of all personnel-serviced devices requiring an energy supply. This facilitates all the treatment, care and monitoring which the patient requires. All the necessary electric sockets and communications connections, medical gas outlets and general and reading lights are integrated in a highly-flexible modular system. The wall system consists of right-angled extruded aluminium supply profiles in two depths, matching equipment rail profiles and lights with translucent extruded acrylic-satin light covers.
This Bed Head Unit is available in various designs and can be fitted with medical connection devices, consoles and accessories. The 1-bar or 2-bar cart on the positive-fitting adjustable equipment rail profile (25 x 10 mm) provide the highest-possible level of flexibility. The use of such a moveable cart is possible as the shallow nature of the central channel leaves plenty of space for the medical gas connection plugs or accessories mounted to the central equipment rails.
The character of a room has considerable influence on patient well-being and their recovery. This Unit creates spaces of calm. The product merges with the architecture to produce a single unit – an integrative room concept which becalms the clinical atmosphere – whilst providing full functionality and ergonomics for personnel and patient alike.
It is more than a medical supply unit. It is a modular construction system, solving all supply challenges and releasing space for creativity in the room design. It can be used in a number of environments, ranging from normal care duties to the care home. The Bed head Unit provides a whole range of new design features with which to realize a homely environment. Its combinable basic form enables its perfect integration in the room design.
It is integrated flush in a wall panel. It is adaptable to the room design both in terms of material and surface and at the same time, functions as a wall protector. The connections are directly accessible from the front. The positive-fitting integrate able equipment rail profile (25 x 10 mm) for attaching medical devices represents the perfect supplement.
The system represents the perfect solution for the deployment of multimedia terminals at the patient bed. The feed-in and wall-fastening of TV extension arms can be integrated smoothly.
Calm is one of the most important factors in a patient’s recovery. vertical medical supply unit provides for the necessary visual calm.
Its convex front with aluminium lateral carrying profiles floats in front of the wall, covering power sockets and communications technology from direct sight. This produces a generous, restrained overall appearance, providing the patient room with a cosy atmosphere.
The design approach is liberation from the past. Experience tells us to retain – what has proven itself.
The bed head unit releases itself from classical forms whilst fulfilling all demands of functionality and manageability. This compact unit combines media supply with a wooden panel and an asymmetrically placed light. The sockets for high and low voltage current and the medical gases are directly accessible from the front. Wall brackets for multimedia arms can be integrated behind the wooden panel.
The asymmetrical arrangement of the care unit and lighting elements enables functional optimization. Sockets and medical gases are located well within reach next to the patient bed; the light illuminates the room and the reading space above the bed.
compact and comfortable
Adapted to medical use: this can also be fitted with a clamping groove in which accessories can be integrated and can be supplemented by an 25 x 10 mm integrative standard equipment rail.
The harmonious combination of extruded, naturally coloured anodized aluminium profiles with coloured fronts make for a high-class finish. A range of front decors are available, enabling the adaptation of the supply unit to the interior design or the setting of coloured accents.
As horizontal medical supply unit the can be harmonically integrated into each patient room design – into straight-lined new buildings as well as into stylish old buildings. The supply unit is available in two modern and one classic versions: it appears especially fine due to the surrounding thin edge, the front of model S 700 b is horizontally stretched by a slim aluminium stripe and this fits into classic interiors by stylish decorative profiles.
The housing of the medical supply unit is made of extruded, naturally anodized aluminium. HPL-décors can be flush-fitted into the front, thus carrying on the design of the patient room – or setting accents deliberately. Furthermore, there is the possibility to have the front in glass look in several plain colours.
Fitted end covers made of anodized aluminium complete the high quality impression. The top and bottom sides are inclined by 6°. The upper side consists of highly translucent PMMA (acrylic) and is extremely resistant to common cleaning and disinfection solutions.
Beam is a ceiling mounted unit fitted with lighting, provision for medical gases, electrical switches and sockets.
It is a ceiling mounted unit fitted with lighting, provision for medical gases, electrical switches and sockets. The system has been designed for intensive care units, preparation and recovery rooms which require several sockets and switches to supply medical equipment such as monitors, dialysis machines, respirators and other machines required to keep the patient alive. Both sides of the unit can be equipped with the medical equipment.
Designed to guarantee complete ease of movement, the new track rail allows to slide and safely fix all needed equipment for whichever level of intensive treatment.
This optional feature ensures a well-lighted atmosphere while the main ambient lighting is off. Perfectly integrated inside the ceiling pillars this system can be both controlled from the unit itself or any additional handset if needed.
Ceiling hanging unit greatest example of how technical know-how and responsible attitude to strive for the best results coalesce harmoniously.
This is the greatest example of how technical know-how and responsible attitude to strive for the best results coalesce harmoniously. It can be also offered in free-standing configuration, fixed on the ceiling through a solid pillar. In this way this can be mounted anywhere in the room with a wide range of accessories and rotating equipment carries making this bed head unit the ideal solution for special intensive care units.
The head can freely rotate 345°. In this way the medical staff can always have easy access to all equipment. This reduces to the minimum the workload and enhances significantly the workflow.
In only one solution Bridge unit houses all needed services (lights, sockets and switches, nurse call system, gas outlets) which can be arranged in each side both internally and externally.
The structural profiles and pillars, as per our overall standard, are completely extruded: The generous thickness guarantees an adequate
payload allowing the possibility to mount all the necessary equipment without risking to overload the whole structure. The whole system
can be equipped with a broad range of accessories that can slide along all 4 sides thanks to our newly engineered rotating corners.
The possibility to combine the whole unit to a ceiling laminar flow system allows a dramatic reduction of the air turbulence that offers a completely germ-free environment.
The corners can be offered evenly:
- Standard non-rotating having accessories sliding only along one side.
- 90° rotating to maximize the usage of accessories that can be moved from one side to the other.
Pendant is a suspended unit thought specifically for special intensive care units and operating theaters. It can be configured either for the surgeon or the anesthesiologist and the service head can be equipped with all the needed electrical and medical components in compliance with any specification given. It has been designed to offer the medical staff maximum flexibility and reliability.
The unit can be also supplied in the most complete configuration which is highly requested for all ICU areas.
The column is customizable with
- Shelves and storage
- Cable management system
- Mounting system
- Single workstation component
Modern medicine seeks to reduce the burden on the patient by reducing invasive treatment to a minimum. This has transferred this approach to the patient room: the slimmest care unit possible with a clear form language and a front made completely of translucent plastic. It acts as a surface over which the sun rises as soon as the light is switched on.
The Bed Head Unit responds to the invasion of the patient room by medical equipment with the creation of a pleasant visual calming effect – with maximum functionality for personnel and patient alike. All the necessary electric sockets and communications connections, medical gas outlets and general and reading lights are integrated in a highly-flexible modular system.
It is fitted with indirect general lighting, adjustable reading lights, a night light and optional RBG LED surround lighting.
The special acceptance system on the underside enables supplementing the with accessories enabling a response to almost every requirement.
In intensive medicine, the life of patients can depend on a very few machines. State-of-the-art medical devices, connected to an absolutely reliable, functional and easy-to-operate supply system represent the basic requirements for maintaining life-sustaining measures. The Bed Head Unit was developed to enable the easy handling of all personnel-serviced devices requiring an energy supply. This facilitates all the treatment, care and monitoring which the patient requires. All the necessary electric sockets and communications connections, medical gas outlets and general and reading lights are integrated in a highly-flexible modular system. The wall system consists of right-angled extruded aluminium supply profiles in two depths, matching equipment rail profiles and lights with translucent extruded acrylic-satin light covers.
This Bed Head Unit is available in various designs and can be fitted with medical connection devices, consoles and accessories. The 1-bar or 2-bar cart on the positive-fitting adjustable equipment rail profile (25 x 10 mm) provide the highest-possible level of flexibility. The use of such a moveable cart is possible as the shallow nature of the central channel leaves plenty of space for the medical gas connection plugs or accessories mounted to the central equipment rails.
The character of a room has considerable influence on patient well-being and their recovery. This Unit creates spaces of calm. The product merges with the architecture to produce a single unit – an integrative room concept which becalms the clinical atmosphere – whilst providing full functionality and ergonomics for personnel and patient alike.
It is more than a medical supply unit. It is a modular construction system, solving all supply challenges and releasing space for creativity in the room design. It can be used in a number of environments, ranging from normal care duties to the care home. The Bed head Unit provides a whole range of new design features with which to realize a homely environment. Its combinable basic form enables its perfect integration in the room design.
It is integrated flush in a wall panel. It is adaptable to the room design both in terms of material and surface and at the same time, functions as a wall protector. The connections are directly accessible from the front. The positive-fitting integrate able equipment rail profile (25 x 10 mm) for attaching medical devices represents the perfect supplement.
The system represents the perfect solution for the deployment of multimedia terminals at the patient bed. The feed-in and wall-fastening of TV extension arms can be integrated smoothly.
Calm is one of the most important factors in a patient’s recovery. vertical medical supply unit provides for the necessary visual calm.
Its convex front with aluminium lateral carrying profiles floats in front of the wall, covering power sockets and communications technology from direct sight. This produces a generous, restrained overall appearance, providing the patient room with a cosy atmosphere.
The design approach is liberation from the past. Experience tells us to retain – what has proven itself.
The bed head unit releases itself from classical forms whilst fulfilling all demands of functionality and manageability. This compact unit combines media supply with a wooden panel and an asymmetrically placed light. The sockets for high and low voltage current and the medical gases are directly accessible from the front. Wall brackets for multimedia arms can be integrated behind the wooden panel.
The asymmetrical arrangement of the care unit and lighting elements enables functional optimization. Sockets and medical gases are located well within reach next to the patient bed; the light illuminates the room and the reading space above the bed.
compact and comfortable
Adapted to medical use: this can also be fitted with a clamping groove in which accessories can be integrated and can be supplemented by an 25 x 10 mm integrative standard equipment rail.
The harmonious combination of extruded, naturally coloured anodized aluminium profiles with coloured fronts make for a high-class finish. A range of front decors are available, enabling the adaptation of the supply unit to the interior design or the setting of coloured accents.
As horizontal medical supply unit the can be harmonically integrated into each patient room design – into straight-lined new buildings as well as into stylish old buildings. The supply unit is available in two modern and one classic versions: it appears especially fine due to the surrounding thin edge, the front of model S 700 b is horizontally stretched by a slim aluminium stripe and this fits into classic interiors by stylish decorative profiles.
The housing of the medical supply unit is made of extruded, naturally anodized aluminium. HPL-décors can be flush-fitted into the front, thus carrying on the design of the patient room – or setting accents deliberately. Furthermore, there is the possibility to have the front in glass look in several plain colours.
Fitted end covers made of anodized aluminium complete the high quality impression. The top and bottom sides are inclined by 6°. The upper side consists of highly translucent PMMA (acrylic) and is extremely resistant to common cleaning and disinfection solutions.
Beam is a ceiling mounted unit fitted with lighting, provision for medical gases, electrical switches and sockets
It is a ceiling mounted unit fitted with lighting, provision for medical gases, electrical switches and sockets. The system has been designed for intensive care units, preparation and recovery rooms which require several sockets and switches to supply medical equipment such as monitors, dialysis machines, respirators and other machines required to keep the patient alive. Both sides of the unit can be equipped with the medical equipment.
Designed to guarantee complete ease of movement, the new track rail allows to slide and safely fix all needed equipment for whichever level of intensive treatment.
This optional feature ensures a well-lighted atmosphere while the main ambient lighting is off. Perfectly integrated inside the ceiling pillars this system can be both controlled from the unit itself or any additional handset if needed.
Ceiling hanging unit greatest example of how technical know-how and responsible attitude to strive for the best results coalesce harmoniously.
This is the greatest example of how technical know-how and responsible attitude to strive for the best results coalesce harmoniously. It can be also offered in free-standing configuration, fixed on the ceiling through a solid pillar. In this way this can be mounted anywhere in the room with a wide range of accessories and rotating equipment carries making this bed head unit the ideal solution for special intensive care units.
The head can freely rotate 345°. In this way the medical staff can always have easy access to all equipment. This reduces to the minimum the workload and enhances significantly the workflow.
In only one solution Bridge unit houses all needed services (lights, sockets and switches, nurse call system, gas outlets) which can be arranged in each
side both internally and externally.
The structural profiles and pillars, as per our overall standard, are completely extruded: The generous thickness guarantees an adequate
payload allowing the possibility to mount all the necessary equipment without risking to overload the whole structure. The whole system
can be equipped with a broad range of accessories that can slide along all 4 sides thanks to our newly engineered rotating corners.
The possibility to combine the whole unit to a ceiling laminar flow system allows a dramatic reduction of the air turbulence that offers a
completely germ-free environment.
The corners can be offered evenly:
- Standard non-rotating having accessories sliding only along one side.
- 90° rotating to maximize the usage of accessories that can be moved from one side to the other.
Isola is a suspended unit thought specifically for special intensive care units and operating theaters. It can be configured either for the surgeon or the anesthesiologist and the service head can be equipped with all the needed electrical and medical components in compliance with any specification given. It has been designed to offer the medical staff maximum flexibility and reliability.
Isola can be also supplied in the most complete configuration which is highly requested for all ICU areas.
The column is customizable with
- Shelves and storage
- Cable management system
- Mounting system
- Single workstation component