Degreased Medical Copper Tube
Degreased copper tube is manufactured under BS EN 13485 Medical Devices: Quality Management Systems.
- Each pipe is cleaned to have a maximum carbon level of 0.20mg/dm².
- Each pipe is individually end-capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no.
- 25-year guarantee
Degreased copper tube is manufactured under BS EN 13485 Medical Devices: Quality Management Systems.
- Each pipe is cleaned to have a maximum carbon level of 0.20mg/dm².
- Each pipe is individually end-capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no.
- 25-year guarantee
Lockable Line Valves
Lockable line valve is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are designed to have a tight shut-off and blow-out-proof stem for protection against pressure surges.
Lockable line valve is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are designed to have a tight shut-off and blow-out-proof stem for protection against pressure surges.
Medical Gas Pipeline Identification Tape
Pipeline ID tape is suitable for identifying medical gas pipelines compliant with BS EN 7396, HTM 02-01 NHS Health Technical Memorandum, C11, and BS 1710. Colour banding should be applied near valves, junctions, walls, etc. A label every 3m should identify each gas and arrow tape showing the flow direction of the gas.
Pipeline ID tape is suitable for identifying medical gas pipelines compliant with BS EN 7396, HTM 02-01 NHS Health Technical Memorandum, C11, and BS 1710. Colour banding should be applied near valves, junctions, walls, etc. A label every 3m should identify each gas and arrow tape showing the flow direction of the gas.
Degreased Medical Gas Copper Fittings
Compliant to HTM 02-01, BS EN 13384, BS EN 1057, and BS 287 Part 1 Table X as quoted in HTM 02-01 & C11
- Each fitting is individually bagged in clear protective polythene bags and sealed to maintain cleanliness.
- All fittings carry a label identifying the degreased specification and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
Compliant to HTM 02-01, BS EN 13384, BS EN 1057, and BS 287 Part 1 Table X as quoted in HTM 02-01 & C11
- Each fitting is individually bagged in clear protective polythene bags and sealed to maintain cleanliness.
- All fittings carry a label identifying the degreased specification and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
Brass Munsen Ring
End-feed copper fittings are manufactured in the UK under BS EN 13348. Munsen Rings are manufactured from brass with a single M10 tapping complete with brass screws. M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws.
End-feed copper fittings are manufactured in the UK under BS EN 13348. Munsen Rings are manufactured from brass with a single M10 tapping complete with brass screws. M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws.
Non-Return Valves
All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
- Fully HTM 02-01 compliant
- Can be supplied for use with pipework of 15mm to 104mm
- Fitted with flat faced ‘o’ ring unions
- Every unit is tested for pressure and tightness before dispatch
All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.
- Fully HTM 02-01 compliant
- Can be supplied for use with pipework of 15mm to 104mm
- Fitted with flat faced ‘o’ ring unions
- Every unit is tested for pressure and tightness before dispatch
NIST
O2 Ceiling NIST Copper Tube – 15mm Dia – 150mm Length
- Gas Specific Female NIST
- Gas Specific engraving on Female NIST
- Supplied with a length of Copper pipe
- Machined to BS EN ISO 5359:2008
O2 Ceiling NIST Copper Tube – 15mm Dia – 150mm Length
- Gas Specific Female NIST
- Gas Specific engraving on Female NIST
- Supplied with a length of Copper pipe
- Machined to BS EN ISO 5359:2008