MOV-30 Vacuum Drying Oven
The Vacuum Oven is designed to separate solvents from solutions or other samples with high boiling points.
By reducing the boiling point of the solvent with vacuum, the sample is protected, and the separation process is made easier.
This oven is widely used in various fields such as biochemistry, chemical industry, pharmacy, medical and health, agricultural research, and environmental protection.
It is particularly suitable for fast and efficient drying of heat-sensitive, easily decomposed, and easily oxidized materials, as well as articles with complex components.
The oven is also versatile and can be used for powder drying, baking, and disinfection and sterilization of various types of glass containers.
Its application in the laboratory makes it an essential tool for research and experimentation.
- Model : MOV-30
- Chamber Volume(L) : 30
- Temp. Range(℃) : RT.+5~250
- Temperature resolution(℃) : 0.1 (at100℃ )
- Temperature variation(℃) : ±3.7 (at100℃)
- Heating power(W) : 2100
- Vacuum range : 0~1 atm
- Timer : 1min~99hr59min
- IP code : IP20
- Inner size(mm) : 320×320×320
- Dimension(mm) : 545×505×630
- Weight [kg] : 63
MOV-65 Midea Forced Air Drying Oven
The Vacuum Oven is designed to separate solvents from solutions or other samples with high boiling points.
By reducing the boiling point of the solvent with vacuum, the sample is protected, and the separation process is made easier.
This oven is widely used in various fields such as biochemistry, chemical industry, pharmacy, medical and health, agricultural research, and environmental protection.
It is particularly suitable for fast and efficient drying of heat-sensitive, easily decomposed, and easily oxidized materials, as well as articles with complex components.
The oven is also versatile and can be used for powder drying, baking, and disinfection and sterilization of various types of glass containers.
Its application in the laboratory makes it an essential tool for research and experimentation.
- Model : MOV-65
- Chamber Volume(L) : 65
- Temperature resolution(℃) : 0.1 (at100℃)
- Temperature variation(℃) : ±3.7 (at100℃)
- Heating power(W) : 2100
- Vacuum range : 0~1 atm
- Timer : 1min~99hr59min
- IP code : IP20
- Inner size(mm) : 400×400×400
- Dimension(mm) : 625×585×710
- Weight [kg] : 103
MOV-120 Lab Forced Convection Drying Oven
The Vacuum Oven is designed to separate solvents from solutions or other samples with high boiling points.
By reducing the boiling point of the solvent with vacuum, the sample is protected, and the separation process is made easier.
This oven is widely used in various fields such as biochemistry, chemical industry, pharmacy, medical and health, agricultural research, and environmental protection.
It is particularly suitable for fast and efficient drying of heat-sensitive, easily decomposed, and easily oxidized materials, as well as articles with complex components.
The oven is also versatile and can be used for powder drying, baking, and disinfection and sterilization of various types of glass containers.
Its application in the laboratory makes it an essential tool for research and experimentation.
- Model : MOV-120
- Chamber Volume(L) : 120
- Temp. Range(℃) : RT.+5~250
- Temperature resolution(℃) : 0.1 (at100℃)
- Temperature variation(℃) : ±3.7 (at100℃)
- Heating power(W) : 2550
- Vacuum range : 0~1 atm
- Timer : 1min~99hr59min
- IP code : IP20
- Inner size(mm) : 500×500×500
- Dimension(mm) : 725×685×810
- Weight [kg] : 147
MF-02G Midea 50L High Performance Forced Convection Drying Oven
The Forced-Air Lab Oven is perfect for high-temperature storage and drying applications in laboratories.
With its rapid, forced circulation of hot air, this oven ensures uniform temperatures and even heat transfer for faster drying times.
The user-friendly design and gentle airflow of the MF-G Models cater to all sterilization and drying tasks that don’t require high drying rates or specific timing needs.
The adjustable access port on the rear makes it easy to insert cables and feedthroughs, while the top exhaust port expels damp hot air and replaces it with fresh, dry hot air.
The Forced-Air Lab Oven is a reliable and efficient solution for laboratory drying and heating applications.
- Model : MF-02G
- Chamber Volume(L) : 50
- Temp. Range(℃) : RT.+10~250
- Temp.Stability at 100℃ : 0.5
- Interior Dimension (W×D×H)mm : 400×420×420
- Exterior Dimension (W×D×H)mm : 540×620×780
- Number of shelves : 2/8
- IP code : IP20
- Weight [kg] : 55
- Power supply : 230V, 50/60 Hz
MF-12G 100L Forced Convection Drying Oven
The Forced-Air Lab Oven is perfect for high-temperature storage and drying applications in laboratories.
With its rapid, forced circulation of hot air, this oven ensures uniform temperatures and even heat transfer for faster drying times.
The user-friendly design and gentle airflow of the MF-G Models cater to all sterilization and drying tasks that don’t require high drying rates or specific timing needs.
The adjustable access port on the rear makes it easy to insert cables and feedthroughs, while the top exhaust port expels damp hot air and replaces it with fresh, dry hot air.
The Forced-Air Lab Oven is a reliable and efficient solution for laboratory drying and heating applications.
- Model : MF-12G
- Chamber Volume(L) : 100
- Temp. Range(℃) : RT.+10~250
- Temp.Stability at 100℃ : 0.6
- Interior Dimension (W×D×H)mm : 480×460×500
- Exterior Dimension (W×D×H)mm : 600×690×810
- Number of shelves : 2/12
- IP code : IP20
- Weight [kg] : 62
- Power supply : 230V, 50/60 Hz
MF-22G 150L Midea Biomedical Gravity-Flow Convection Drying Oven
The Forced-Air Lab Oven is perfect for high-temperature storage and drying applications in laboratories.
With its rapid, forced circulation of hot air, this oven ensures uniform temperatures and even heat transfer for faster drying times.
The user-friendly design and gentle airflow of the MF-G Models cater to all sterilization and drying tasks that don’t require high drying rates or specific timing needs.
The adjustable access port on the rear makes it easy to insert cables and feedthroughs, while the top exhaust port expels damp hot air and replaces it with fresh, dry hot air.
The Forced-Air Lab Oven is a reliable and efficient solution for laboratory drying and heating applications.
- Model : MF-22G
- Chamber Volume(L) : 150
- Temp. Range(℃) : RT.+10~250
- Temp.Stability at 100℃ : 0.8
- Interior Dimension (W×D×H)mm : 500×480×625
- Exterior Dimension (W×D×H)mm : 660×750×920
- Number of shelves : 2/14
- IP code : IP20
- Weight [kg] : 72.5
- Power supply : 230V, 50/60 Hz
MH-10 100L Midea Biomedical′s Constant Temperature Incubator
Precise Temperature Control
Equipped with microcomputer PID control system and 2 sensors, precisely control the cooling and heating tem-perature with 0.1℃ accuracy.
304 Stainless Steel Interior Excellent uniformity of temperature, gas and humidity
Safe perforated shelves with anti-slip design, allow internal air flow freely.Abrasive and corrosion resistance, easy to clean.
Excellent uniformity of temperature, gas and humidity Inner glass door
Fan motor on the top and heat system in 6 sides of cabinet, ensure homoge-neous conditions throughout the entire chamber.
Inner glass door
Easy to observe inner samples.Reduce the disturbance of the incuba-tion conditions.Decrease gas consumption and the risk of contaminants entering inside.
Outer Door
Foaming door：Good insulation performance, energy saving, reduce noise.
Easy to clean
Rounded corner allows easy cleaning. The entire chamber is made of stainless steel (SUS304).
- Model : MH-10
- Volume(L) : 100L
- Temperature Range[℃] : RT.+5~65
- Temperature uniformity : <±0.3 at37℃ and 25℃ RT
- Temperature Stability[℃] : ±0.1 at 37℃
- Temperature Controller : Digital Display with PID automatic regulation, Button Control
- Timer : 1min~99 hr59min
- Safety : Independent safety temperature protection, Open door alarm function
- Heating Capacity [W] : 340
- Shelves[included /max.] : 2/4
- Inner Dimensions [WxDxH in mm] : 480 x 480 x 495
- Outer Dimensions [WxDxH in mm] : 560 x 560 x 760
- Weight [kg] : 50
- Power supply : AC 220~240V,50/60 Hz
MH-15 Midea 150L Constant Temperature Incubator for Bacteria
Precise Temperature Control
Equipped with microcomputer PID control system and 2 sensors, precisely control the cooling and heating tem-perature with 0.1℃ accuracy.
304 Stainless Steel Interior Excellent uniformity of temperature, gas and humidity
Safe perforated shelves with anti-slip design, allow internal air flow freely.Abrasive and corrosion resistance, easy to clean.
Excellent uniformity of temperature, gas and humidity Inner glass door
Fan motor on the top and heat system in 6 sides of cabinet, ensure homoge-neous conditions throughout the entire chamber.
Inner glass door
Easy to observe inner samples.Reduce the disturbance of the incuba-tion conditions.Decrease gas consumption and the risk of contaminants entering inside.
Outer Door
Foaming door：Good insulation performance, energy saving, reduce noise.
Easy to clean
Rounded corner allows easy cleaning. The entire chamber is made of stainless steel (SUS304).
- Model : MH-15
- Temperature Range[℃] : RT.+5~65
- Temperature uniformity : <±0.3 at37℃and 25℃ RT
- Temperature Stability[℃] : ±0.1 at 37℃
- Temperature Controller : Digital Display with PID automatic regulation, Button Control
- Timer : 1min~99 hr59min
- Safety : Independent safety temperature protection, Open door alarm function
- Heating Capacity [W] : 340
- Shelves[included /max.] : 2/8
- Inner Dimensions [WxDxH in mm] : 500 x 480 x 620
- Outer Dimensions [WxDxH in mm] : 560 x 580 x 880
- Weight [kg] : 65
- Power supply : AC 220~240V,50/60 Hz
MH-25 260L Lab Uniform Temperature Distribution Constant Temperature Drying Oven
Precise Temperature Control
Equipped with microcomputer PID control system and 2 sensors, precisely control the cooling and heating tem-perature with 0.1℃ accuracy.
304 Stainless Steel Interior Excellent uniformity of temperature, gas and humidity
Safe perforated shelves with anti-slip design, allow internal air flow freely.Abrasive and corrosion resistance, easy to clean.
Excellent uniformity of temperature, gas and humidity Inner glass door
Fan motor on the top and heat system in 6 sides of cabinet, ensure homoge-neous conditions throughout the entire chamber.
Inner glass door
Easy to observe inner samples.Reduce the disturbance of the incuba-tion conditions.Decrease gas consumption and the risk of contaminants entering inside.
Outer Door
Foaming door：Good insulation performance, energy saving, reduce noise.
Easy to clean
Rounded corner allows easy cleaning. The entire chamber is made of stainless steel (SUS304).
- Model : MH-25
- Volume [L] : 260L
- Temperature Range[℃] : RT.+5~65
- Temperature uniformity : <±0.3 at37℃ and 25℃ RT
- Temperature Stability[℃] : ±0.1 at 37℃
- Temperature Controller : Digital Display with PID automatic regulation, Button Control
- Timer : 1min~99 hr59min
- Timer : 1min~99 hr59min
- Safety : Independent safety temperature protection, Open door alarm function
- Heating Capacity [W] : 610
- Shelves[included /max.] : 3/8
- Inner Dimensions [WxDxH in mm] : 530 x 590 x 900
- Outer Dimensions [WxDxH in mm] : 630 x 680 x 1125
- Weight [kg] : 115
- Power supply : AC 220~240V,50/60 Hz
MCP-120 120L Laboratory Biochemical Air Jacketed CO2 Incubator
LED Control
Intelligent Control for density,Temperature, Alarm, Automatic Decon-tamination.
Precise Temperature Control
Equipped with microcomputer PID control system and 2 sensors, precisely control the cooling and heating tem-perature with 0.1℃ accuracy.
304 Stainless Steel Interior Excellent uniformity of temperature, gas and humidity
Safe perforated shelves with anti-slip design, allow internal air flow freely.Abrasive and corrosion resistance, easy to clean.
Excellent uniformity of temperature, gas and humidity Inner glass door
Fan motor on the top and heat system in 6 sides of cabinet, ensure homoge-neous conditions throughout the entire chamber.
Inner glass door
Easy to observe inner samples.Reduce the disturbance of the incuba-tion conditions.Decrease gas consumption and the risk of contaminants entering inside.
Outer Door
Foaming door：Good insulation performance, energy saving, reduce noise.
Easy to clean
Rounded corner allows easy cleaning. The entire chamber is made of stainless steel (SUS304).
125℃ Dry Heat Sterilization Air Jacketed CO2 Incubator
- Model : MCP-120
- Temperature Range[℃] : Ambient +5℃ to 60℃
- Uniformity at 37℃/ RT 25℃ : ±0.3℃
- CO2 Inlet pressure range : 0.3~0.5bar
- Controller : PID
- Humidity at 37℃ : 70% ~ 80% at 37℃（with water try
- CO2 Range : 0% to 20%
- Accuracy at 5% at 37℃ : ±0.1% at 5% at 37℃
- Increment : 0.1%
- CO2 Sensor : IR CO2 Sensor
- Control panel : LED Display
- Jacket type : Dry wall type (6 sides direct heating)
- Chamber material : Stainless steel (SUS 304)
- Outer door : Silicon Packing Magnet Door
- Inner door : Tempered Safety Glass Door
- Weight : 70KG
- Capacity : 120 L
- Perforated Shelve : 2/4
- Max. heating power : 320W
- Chamber dimension(WxDxH/mm) : 480x470x520
- Overall dimension (WxDxH/mm) : 580x560x765
- Standard UV : NO
- Standard dry heat sterilization : YES
- Voltage/frequency : 220-240V/50-60Hz
MCP-180 179L High Quality Reliable Laboratory Air Jacketed CO2 Incubator
LED Control
Intelligent Control for density,Temperature, Alarm, Automatic Decon-tamination.
Precise Temperature Control
Equipped with microcomputer PID control system and 2 sensors, precisely control the cooling and heating tem-perature with 0.1℃ accuracy.
304 Stainless Steel Interior Excellent uniformity of temperature, gas and humidity
Safe perforated shelves with anti-slip design, allow internal air flow freely.Abrasive and corrosion resistance, easy to clean.
Excellent uniformity of temperature, gas and humidity Inner glass door
Fan motor on the top and heat system in 6 sides of cabinet, ensure homoge-neous conditions throughout the entire chamber.
Inner glass door
Easy to observe inner samples.Reduce the disturbance of the incuba-tion conditions.Decrease gas consumption and the risk of contaminants entering inside.
Outer Door
Foaming door：Good insulation performance, energy saving, reduce noise.
Easy to clean
Rounded corner allows easy cleaning. The entire chamber is made of stainless steel (SUS304).
- Model : MCP-180
- Temperature Range[℃] :
-
Ambient +5℃ to 60℃
- Uniformity at 37℃/ RT 25℃ : ±0.3℃
- CO2 Inlet pressure range : 0.3~0.5bar
- Controller : PID
- Humidity at 37℃ : 70% ~ 80% at 37℃（with water try)
- CO2 Range : 0% to 20%
- Accuracy at 5% at 37℃ : ±0.1% at 5% at 37℃
- Increment : 0.1%
- CO2 Sensor : IR CO2 Sensor
- Control panel : LED Display
- Jacket type : Dry wall type (6 sides direct heating)
- Chamber material : Stainless steel (SUS 304)
- Outer door : Silicon Packing Magnet Door
- Inner door : Tempered Safety Glass Door
- Weight : 80KG
- Capacity : 179 L
- Perforated Shelve : 3/8
- Max. heating power : 320W
- Sterilization heating power : 650W
- Chamber dimension(WxDxH/mm) : 473x528x710
- Overall dimension (WxDxH/mm) : 560x620x945
- Standard UV : NO
- Standard dry heat sterilization : YES
- Voltage/frequency : 220-240V/50-60Hz
MCP-260 260L Inner Glass Door Carbon Dioxide Cell-Culture Lab Air Jacket CO2 Incubator
LED Control
Intelligent Control for density,Temperature, Alarm, Automatic Decon-tamination.
Precise Temperature Control
Equipped with microcomputer PID control system and 2 sensors, precisely control the cooling and heating tem-perature with 0.1℃ accuracy.
304 Stainless Steel Interior Excellent uniformity of temperature, gas and humidity
Safe perforated shelves with anti-slip design, allow internal air flow freely.Abrasive and corrosion resistance, easy to clean.
Excellent uniformity of temperature, gas and humidity Inner glass door
Fan motor on the top and heat system in 6 sides of cabinet, ensure homoge-neous conditions throughout the entire chamber.
Inner glass door
Easy to observe inner samples.Reduce the disturbance of the incuba-tion conditions.Decrease gas consumption and the risk of contaminants entering inside.
Outer Door
Foaming door：Good insulation performance, energy saving, reduce noise.
Easy to clean
Rounded corner allows easy cleaning. The entire chamber is made of stainless steel (SUS304).
- Model : MCP-260
- Temperature Range[℃]: Ambient +5℃ to 60℃
- Accuracy : ±0.1℃ at 37℃
- Uniformity at 37℃/ RT 25℃ : ±0.4℃
- CO2 Inlet pressure range : 0.6~0.7bar
- Controller : PID
- Humidity at 37℃ : 70% ~ 80% at 37℃（with water try）
- CO2 Range : 0% to 20%
- Accuracy at 5% at 37℃ : ±0.1% at 5% at 37℃
- Increment : 0.1%
- CO2 Sensor : IR CO2 Sensor
- Control panel : LED Display
- Jacket type : Dry wall type (6 sides direct heating)
- Chamber material : Stainless steel (SUS 304)
- Outer door : Silicon Packing Magnet Door
- Inner door : Tempered Safety Glass Door
- Weight : 115KG
- Capacity : 260L
- Perforated Shelve : 3/8
- Max. heating power : 610W
- Sterilization heating power : 850W
- Chamber dimension(WxDxH/mm) : 530x590x900
- Overall dimension (WxDxH/mm) : 630x680x1125
- Standard UV : NO
- Standard dry heat sterilization : YES
- Voltage/frequency : 220-240V/50-60Hz